ETA 2480 – interchangeable spare parts
ETA 2480 movement
Which spare parts fit the ETA 2480 movement? For every part you can see which other calibers use the same part according to the original interchangeability list.
33Parts with interchange data
13Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of ETA and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.
🛒 Spare parts for ETA 2480 in our shop
Clutch Wheel for ETA 2360, 2365, 2369, 2412, 2480, 2482, 2487 – Part 407 – NOS13,90 € incl. VAT *View item
Click Spring for ETA 2410, 2412, 2480, 2482, 2485, 2487 – Part 430 – NOS9,90 € incl. VAT *View item
Cannon Pinion with Driving Wheel for ETA 2410, 2428, 2480 – Part 242/110,90 € incl. VAT *View item🔧 Interchangeable parts
| Part no. | Description | Also fits |
|---|---|---|
| 163ISO 81.337 | Cannon pinion stud | |
| 182ISO 20.030 | Barrel and cover | |
| 195ISO 20.060 | Barrel arbor | |
| 203ISO 30.012 | Intermediate wheel | |
| 210ISO 30.025 | Third wheel | |
| 220ISO 30.027 | Second wheel | |
| 242/1ISO 31.083.18 | Cannon pinion with driver, without sweep second | |
| 250ISO 31.046 | Hour wheel | |
| 260ISO 31.041 | Minute wheel | |
| 301ISO 40.301 | Regulator for flat hairspring | |
| 311ISO 70.800 | Upper cap jewel with end-piece, f. balance | |
| 330ISO 70.801 | Lower cap jewel with end-piece, f. balance | |
| 336ISO 70.806 | Upper cap-jewel with end-piece, for escape wheel | |
| 346ISO 70.807 | Lower cap jewel with end-piece, f. esc. wh. | |
| 401ISO 51.010 | Winding stem | |
| 407ISO 31.121 | Sliding pinion | |
| 410ISO 31.120 | Winding pinion | |
| 415ISO 31.020 | Ratchet wheel | |
| 420ISO 31.023 | Crown wheel | |
| 422ISO 81.067 | Crown wheel ring | |
| 425ISO 51.120 | Click | |
| 430ISO 61.080 | Click spring | |
| 435ISO 51.050 | Yoke | |
| 440ISO 61.100 | Yoke spring | |
| 443ISO 51.080 | Setting lever | |
| 443/5443ISO 51.080.06/.01 | Setting lever | |
| 445ISO 51.090 | Setting lever jumper | |
| 450ISO 31.100 | Setting wheel | |
| 462ISO 10.062 | Minute train bridge | |
| 702ISO 30.040.12 | Escape wheel and pinion, pivoted, for two end-pieces | |
| 704ISO 30.040.10 | Escape wheel and pinion, for upper end-piece | |
| 705ISO 30.040 | Escape wheel | |
| 710ISO 40.010 | Pallet fork |
Source: original interchangeability lists of ETA (checked transcription) and checked original spare-part labels · as of 2026-10-18. Height / execution: the part fits only in this height or execution.