Deutsch
Español
Français
Italiano
ST 96N – interchangeable spare parts
ST 96N movement
Which spare parts fit the ST 96N movement? For every part you can see which other calibers use the same part according to the original interchangeability list.
28Parts with interchange data
50Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of ST and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.
🛒 Spare parts for ST 96N in our shop
🔧 Interchangeable parts
| Part no. | Description | Also fits |
|---|---|---|
| 182ISO 20.030 | Barrel and cover | |
| 195ISO 20.060 | Barrel arbor | |
| 206ISO 30.015 | Center wheel | |
| 210ISO 30.025 | Third wheel | |
| 218ISO 30.025.11 | Third wheel and pinion, for lower end-piece | |
| 227ISO 30.027 | Sweep second wheel | |
| 245ISO 31.080 | Cannon pinion with clam notch | Height 182 |
| 255ISO 31.046 | Hour wheel | Height 110 |
| 260ISO 31.041 | Minute wheel | |
| 307ISO 40.301 | Regulator with adjustable stud holder, for flat hairspring | |
| 311ISO 70.800 | Upper cap jewel with end-piece | |
| 330ISO 70.801 | Lower cap jewel with end-piece | |
| 346ISO 70.807 | Lower cap jewel with end-piece, f. esc. wheel | |
| 401ISO 51.010 | Winding stem | |
| 407ISO 31.121 | Clutch wheel | |
| 410ISO 31.120 | Winding pinion | |
| 415ISO 31.020 | Ratchet wheel | |
| 420ISO 31.023 | Crown wheel | |
| 422ISO 81.067 | Crown wheel ring | FHF 55-4FHF 67FHF 67-2FHF 67-2NFHF 67-4FHF 72-4FHF 72-4NFHF 72-9FHF 73FHF 73-2FHF 73-2NFHF 73-4FHF 73-4NFHF 74FHF 74-2FHF 74-4FHF 74-4NFHF 671FHF 671-2FHF 671-2NFHF 675FHF 675-4FHF 676FHF 676-4FHF 725-4FHF 725-4NFHF 725-9FHF 729-4NFHF 735FHF 735-4FHF 735-4NFHF 739FHF 739-4NFHF 741FHF 745FHF 745-4FHF 745-4NST 96ST 96-4ST 96-4NST 97ST 969ST 969-4ST 969-4NST 969NST 974 |
| 434ISO 51.120 | Clicking spring | |
| 435ISO 51.050 | Yoke | |
| 443/1ISO 51.080.06 | Setting lever, assembled | |
| 445/2ISO 51.091 | Combined setting lever jumper | |
| 450ISO 31.100 | Setting wheel | |
| 462ISO 10.062 | Minute work cock | |
| 703ISO 30.040.11 | Escape wheel and pinion, for lower end-piece | |
| 705ISO 30.040 | Escape wheel and pinion | |
| 710ISO 40.010 | Jewelled pallet fork and stat |
Source: original interchangeability lists of ST (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.