EB 1612N – interchangeable spare parts

EB 1612N movement

Which spare parts fit the EB 1612N movement? For every part you can see which other calibers use the same part according to the original interchangeability list.

30Parts with interchange data
10Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of EB and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.

🔧 Interchangeable parts

Part no.DescriptionAlso fits
182ISO 20.030Barrel and cover
EB 1612EB 1613N
195ISO 20.060Barrel arbor
EB 1612EB 1613N
220ISO 30.027Fourth wheel
EB 1612EB 1613N
250ISO 31.046Hour wheel
Height 115
EB 1612EB 1613N
260ISO 31.041Minute wheel
EB 1612EB 1613N
301ISO 40.301Regulator for flat hairspring
EB 1612EB 1613N
311ISO 70.800Upper cap jewel with end-piece
EB 1333EB 1333-66EB 1612EB 1613N
330ISO 70.801Lower cap jewel with end-piece
EB 1612EB 1613N
336ISO 70.808Upper cap-jewel with end-piece, for escape wheel
EB 1197EB 1333EB 1438EB 1438NEB 1612EB 1613N
346ISO 70.809Lower cap jewel with end-piece, f. esc. wheel
EB 1612EB 1613N
401ISO 51.010Winding stem
EB 1612EB 1613N
411ISO 31.120Winding pinion
EB 1612EB 1613N
416ISO 31.022Lower ratchet wheel
EB 1612EB 1613N
421ISO 31.025Lower crown wheel
EB 1612EB 1613N
425ISO 51.120Click
EB 1612EB 1613N
430ISO 61.080Click spring
EB 1612EB 1613N
437ISO 51.052Rocking bar
EB 1612EB 1613N
439ISO 61.101Rocking bar spring
EB 1612EB 1613N
443ISO 51.080Setting lever
EB 1613N
443/5443ISO 51.080.06/.01Setting lever
EB 1613N
according to original label
EB 1613EB 1613N
445ISO 51.090Setting lever spring
EB 1612
451ISO 31.102Setting wheel for minute wheel
EB 1612EB 1613N
452ISO 31.104Ratchet-winding wheel
EB 1612EB 1613N
790ISO 30.041Pin escape wheel, pivoted
EB 1612EB 1613N
790/2ISO 30.041.10Pin escape wheel for upper end-piece
EB 1612EB 1613N
790/3ISO 30.041.12Pin escape wheel for two end-pieces
EB 1612EB 1613N
793ISO 40.054Balance with roller, regulated
EB 1612EB 1613N
EB 1612EB 1613N
794ISO 40.055Balance with finger, regulated
EB 1612EB 1613N
797Pin pallet fork for roller
according to original label
EB 1612EB 1613EB 1613N
799 = 799 DancISO 40.120
1st execution
EB 65EB 1333EB 1333-66EB 1612EB 1613N
2nd execution
EB 105EB 1612EB 1613N

Source: original interchangeability lists of EB (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.

🔗 Movements sharing the most parts

→ All calibers of EB

WordPress Cookie Notice by Real Cookie Banner