Deutsch
Español
Français
Italiano
FE 8020 – interchangeable spare parts
FE (France Ebauches) 8020 movement
Which spare parts fit the FE 8020 movement? For every part you can see which other calibers use the same part according to the original interchangeability list.
29Parts with interchange data
3Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of FE (France Ebauches) and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.
🛒 Spare parts for FE 8020 in our shop
🔧 Interchangeable parts
| Part no. | Description | Also fits |
|---|---|---|
| 110ISO 10.048.07 | Train wheel bridge | |
| 136ISO 10.060 | Stem cock | |
| 163/1ISO 80.400 | Center pipe | |
| 203ISO 30.012 | Intermediate wheel and pinion | |
| 210ISO 30.025 | Third wheel | |
| 260ISO 31.041 | Minute wheel | |
| 268ISO 81.170 | ||
| 405ISO 51.020 | Handsetting stem, thread diameter S 0,90 mm | |
| 407ISO 31.121 | Clutch wheel | |
| 435ISO 51.050 | Yoke | |
| 440ISO 61.100 | Yoke spring | |
| 504ISO 51.182 | Setting lever bolt | |
| 560ISO 56.071 | ||
| 4000ISO 10.513 | Electronic module | |
| 4021/1 | ||
| 4021/2 | ||
| 4038ISO 20.584 | Upper magnetic screen | |
| 4046ISO 20.651 | Battery insulator | |
| 4211ISO 20.580 | Rotor | |
| 4401ISO 20.761 | Bridle + | |
| 4929ISO 20.570 | Battery | |
| 5101ISO 10.020.01 | Case screw | |
| 5110ISO 10.048.01 | Bridges and balance cock screws | |
| 5136ISO 10.060.02 | ||
| 5750ISO 90.000.01 | Dial screw | |
| 52740ISO 13.100.01 | Screw for date mechanism maintaining plate | |
| 54000ISO 10.513.01 | Screw for electronic module | |
| 54038ISO 20.584.01 | Screw for upper magnetic screen | |
| 54401ISO 20.761.01 |
Source: original interchangeability lists of FE (France Ebauches) (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.