Deutsch
Español
Français
Italiano
FHF 64-2 – interchangeable spare parts
FHF 64-2 movement
Which spare parts fit the FHF 64-2 movement? For every part you can see which other calibers use the same part according to the original interchangeability list.
39Parts with interchange data
54Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of FHF and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.
🔧 Interchangeable parts
| Part no. | Description | Also fits |
|---|---|---|
| 182ISO 20.030 | Barrel and cover | |
| 195ISO 20.060 | Barrel arbor | |
| 206ISO 30.015 | Center wheel | |
| 210ISO 30.025 | Third wheel | |
| 227ISO 30.027 | Sweep second wheel | |
| 245ISO 31.080 | Cannon pinion with clam notch | |
| 260ISO 31.041 | Minute wheel | |
| 301ISO 40.301 | Regulator for flat hairspring | |
| 307ISO 40.301 | Regulator with adjustable stud holder, for flat hairspring | |
| 311ISO 70.800 | Upper cap jewel with end-piece | |
| 330ISO 70.801 | Lower cap jewel with end-piece | |
| 336ISO 70.806 | Upper cap-jewel with end-piece, for escape wheel | |
| 346ISO 70.807 | Lower cap jewel with end-piece, f. esc. wheel | |
| 401ISO 51.010 | Winding stem | |
| 407ISO 31.121 | Clutch wheel | |
| 410ISO 31.120 | Winding pinion | |
| 415ISO 31.020 | Ratchet wheel | |
| 420ISO 31.023 | Crown wheel | |
| 422ISO 81.067 | Crown wheel ring | |
| 425ISO 51.120 | Click | |
| 430ISO 61.080 | Click spring | |
| 435ISO 51.050 | Yoke | |
| 440ISO 61.100 | Yoke spring | |
| 443ISO 51.080 | Setting lever | |
| 443/5443ISO 51.080.06/01 | Setting lever | |
| 445ISO 51.090 | Setting lever spring | |
| 450ISO 31.100 | Setting wheel | |
| 702ISO 30.040.12 | Escape wheel and pinion, pivoted, for two end-pieces | |
| 703ISO 30.040.11 | Escape wheel and pinion, for lower end-piece | |
| 704ISO 30.040.10 | Escape wheel and pinion, for upper end-piece | |
| 705ISO 30.040 | Escape wheel and pinion | |
| 710ISO 40.010 | Jewelled pallet fork and stat | |
| 2535ISO 13.105 | Date indicator guard | |
| 2556ISO 33.020 | Date indicator driving wheel | |
| 2556/1ISO 33.020.06 | Date indicator driving wheel | |
| 2557/1ISO 91.440 | Date indicator, transferred | |
| 2558ISO 33.010 | Double-toothing hour wheel | Height 170 Height 185 Height 210 |
| 2575ISO 63.030 | Date jumper spring | |
| 2576ISO 53.080 | Date jumper, mounted |
Source: original interchangeability lists of FHF (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.