PUW 61S – interchangeable spare parts
PUW 61S movement
Which spare parts fit the PUW 61S movement? For every part you can see which other calibers use the same part according to the original interchangeability list.
76Parts with interchange data
18Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of PUW and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.
🛒 Spare parts for PUW 61S in our shop
🔧 Interchangeable parts
| Part no. | Description | Also fits |
|---|---|---|
| 125 | Pallet cock | |
| 126 | Center wheel cock | |
| 180 | Barrel with arbor | |
| 195 | Barrel arbor | |
| 210 | Third wheel | |
| 219 | Third wheel and pinion, for two end-pieces | |
| 260 | Minute wheel | |
| 301 | Regulator for flat hairspring | |
| 301/1 | Regulator for flat hairspring | |
| 311 | Upper cap jewel with end-piece | |
| 324 | ||
| 325 | ||
| 330 | Lower cap jewel with end-piece | |
| 336 | Upper cap-jewel with end-piece, for escape wheel | |
| 337 | Upper cap jewel with end-piece, for third wheel | |
| 340 | Upper cap jewel with end-piece, for fourth wheel | |
| 346 | Lower cap jewel with end-piece, f. esc. wheel | |
| 347 | Lower cap jewel with end-piece, for third wheel | |
| 348 | Lower cap jewel with end-piece for pallet staff / for pin pallet staff | |
| 370 | ||
| 371 | ||
| 374 | ||
| 375 | Adjustable stud holder | |
| 376 | ||
| 377 | ||
| 378 | ||
| 379 | ||
| 401 | Winding stem | |
| 407 | Clutch wheel | |
| 410 | Winding pinion | |
| 415 | Ratchet wheel | |
| 415 B | Ratchet wheel | |
| 420 | Crown wheel | |
| 420 B | Crown wheel | |
| 422 | Crown wheel ring | |
| 425 | Click | |
| 430 | Click spring | |
| 435 | Yoke | |
| 440 | Yoke spring | |
| 443 | Setting lever | |
| 445 | Setting lever spring | |
| 450 | Setting wheel | |
| 462 | Minute work cock | |
| 702 | Escape wheel and pinion, pivoted, for two end-pieces | |
| 710 | Jewelled pallet fork and stat | |
| 710 B | Jewelled pallet fork and stat | |
| 711 | Jewelled pallet fork and staff, for lower end-piece | |
| 711 B | Jewelled pallet fork and staff, for lower end-piece | |
| 714 | Pallet staff | |
| 715 | ||
| 719/0 | ||
| 719/1 | ||
| 719/2 | ||
| 719/5 | ||
| 720/0• | Balance with roller | |
| 720/1• | Balance with roller | |
| 720/2• | Balance with roller | |
| 720/5• | Balance with roller | |
| 721/0• | Balance with flat hairspring, regulated | |
| 721/1• | Balance with flat hairspring, regulated | |
| 721/2• | Balance with flat hairspring, regulated | |
| 721/5• | Balance with flat hairspring, regulated | |
| 723 | Balance staff, pivoted | |
| 724 | « Incabloc » balance staff, pivoted | |
| 728• | ||
| 730 | Roller | |
| 732 | ||
| 733 | ||
| 734 | Hairspring | |
| 736 | Collet | |
| 738 | Stud | |
| 740 | ||
| 741 | ||
| 770 S | Mainspring | |
| 770 U | Mainspring | |
| 5443 | Setting lever screw |
Source: original interchangeability lists of PUW (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.
🌀 Matching mainspring
Mainspring dimensions for PUW 61S (height × diameter × thickness × length) and matching mainspring in our shop:
