Venus 175 – interchangeable spare parts

Venus (V) 175 movement

Which spare parts fit the Venus 175 movement? For every part you can see which other calibers use the same part according to the original interchangeability list.

59Parts with interchange data
33Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of Venus (V) and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.

🔧 Interchangeable parts

Part no.DescriptionAlso fits
182ISO 20.030Barrel and cover
195ISO 20.060Barrel arbor
according to original label
206ISO 30.015Center wheel
Height 500
210ISO 30.025Third wheel
225ISO 30.028Fourth wheel and pinion, two long pivots
245ISO 31.080Cannon pinion with clam notch
255ISO 31.046Hour wheel
260ISO 31.041Minute wheel
301ISO 40.301Regulator for flat hairspring
311ISO 70.800Upper cap jewel with end-piece
330ISO 70.801Lower cap jewel with end-piece
336ISO 70.806Upper cap-jewel with end-piece, for escape wheel
401ISO 51.010Winding stem
404Stem for waterproof case, with slot
407ISO 31.121Clutch wheel
410ISO 31.120Winding pinion
415ISO 31.020Ratchet wheel
420ISO 31.023Crown wheel
422ISO 81.067Crown wheel ring
423ISO 81.136Crown wheel core
425ISO 51.120Click
430ISO 61.080Click spring
435ISO 51.050Yoke
440ISO 61.100Yoke spring
443ISO 51.080Setting lever
443/5443ISO 51.080.06/.01Setting lever
445ISO 51.090Setting lever spring
450ISO 31.100Setting wheel
705ISO 30.040Escape wheel and pinion
710ISO 40.010Jewelled pallet fork and stat
8000ISO 35.010Chronograph runner, mounted
Height 780
8020ISO 35.012Minute recording runner (30 min.)
8040ISO 35.012.21Minute recording runner (45 min.)
8060ISO 35.060Driving wheel
8070ISO 55.180Pillar wheel
8070/1ISO 55.181Pillar wheel
8080ISO 55.220Coupling clutch, mounted
8080/1ISO 55.221Coupling clutch, mounted
8100ISO 55.120Sliding gear, mounted (30 min.)
8102ISO 85.370
8120ISO 55.120.21Sliding gear, mounted (45 min.)
8140ISO 55.041.06Operating lever, mounted
2nd execution
8180ISO 55.081Fly-back lever
8200ISO 55.281Blocking lever
8200/1ISO 55.282Blocking lever
8220ISO 55.241Hammer, mounted
8221ISO 85.374
8240ISO 55.344
8270ISO 55.143Minute-recording jumper
8290ISO 65.400Friction spring
8320ISO 65.160Coupling clutch spring
2nd execution
8325ISO 65.100Sliding gear spring
8335ISO 65.041Operating lever spring
2nd execution
8336ISO 85.044
2nd execution
8340ISO 65.072Fly-back lever spring
8345ISO 65.210Blocking lever spring
8350ISO 65.171Hammer spring
8355ISO 65.130Pillar wheel jumper
8500ISO 15.040

Source: original interchangeability lists of Venus (V) (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.

🔗 Movements sharing the most parts

→ All calibers of Venus (V)

WordPress Cookie Notice by Real Cookie Banner