Deutsch
Español
Français
Italiano
Venus 211 – interchangeable spare parts
Venus (V) 211 movement
Which spare parts fit the Venus 211 movement? For every part you can see which other calibers use the same part according to the original interchangeability list.
50Parts with interchange data
29Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of Venus (V) and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.
🔧 Interchangeable parts
| Part no. | Description | Also fits |
|---|---|---|
| 182ISO 20.030 | Barrel and cover | |
| 195ISO 20.060 | Barrel arbor | |
| 206ISO 30.015 | Center wheel | |
| 210ISO 30.025 | Third wheel | |
| 225ISO 30.028 | Fourth wheel and pinion, two long pivots | Height 622 |
| 260ISO 31.041 | Minute wheel | |
| 301ISO 40.301 | Regulator for flat hairspring | |
| 311ISO 70.800 | Upper cap jewel with end-piece | |
| 330ISO 70.801 | Lower cap jewel with end-piece | |
| 336ISO 70.806 | Upper cap-jewel with end-piece, for escape wheel | |
| 401ISO 51.010 | Winding stem | |
| 404 | Stem for waterproof case, with slot | |
| 407ISO 31.121 | Clutch wheel | |
| 410ISO 31.120 | Winding pinion | |
| 415ISO 31.020 | Ratchet wheel | |
| 420ISO 31.023 | Crown wheel | |
| 423ISO 81.136 | Crown wheel core | |
| 425ISO 51.120 | Click | |
| 430ISO 61.080 | Click spring | |
| 435ISO 51.050 | Yoke | |
| 440ISO 61.100 | Yoke spring | |
| 443ISO 51.080 | Setting lever | |
| 443/5443ISO 51.080.06/.01 | Setting lever | |
| 445ISO 51.090 | Setting lever spring | |
| 450ISO 31.100 | Setting wheel | |
| 453ISO 31.101 | Intermediate setting wheel | |
| 2611ISO 63.035 | ||
| 2613 | ||
| 2620 | ||
| 2623/1 | ||
| 2624/1 | ||
| 8000ISO 35.010 | Chronograph runner, mounted | Height 965 |
| 8020ISO 35.012 | Minute recording runner (30 min.) | Height 667 |
| 8040ISO 35.012.21 | Minute recording runner (45 min.) | |
| 8060ISO 35.060 | Driving wheel | |
| 8080ISO 55.220 | Coupling clutch, mounted | |
| 8100ISO 55.120 | Sliding gear, mounted (30 min.) | |
| 8120ISO 55.120.21 | Sliding gear, mounted (45 min.) | |
| 8140ISO 55.041.06 | Operating lever, mounted | |
| 8146ISO 55.086 | ||
| 8180ISO 55.081 | Fly-back lever | |
| 8220ISO 55.241 | Hammer, mounted | |
| 8222ISO 85.475 | ||
| 8270ISO 55.143 | Minute-recording jumper | |
| 8271ISO 15.088 | ||
| 8290ISO 65.400 | Friction spring | |
| 8320ISO 65.160 | Coupling clutch spring | |
| 8325ISO 65.100 | Sliding gear spring | |
| 8335ISO 65.041 | Operating lever spring | |
| 8500ISO 15.040 |
Source: original interchangeability lists of Venus (V) (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.
🌀 Matching mainspring
Mainspring dimensions for Venus 211 (height × diameter × thickness × length) and matching mainspring in our shop:
🔗 Movements sharing the most parts
- Venus 210 (46 parts)
- Venus 200 (12 parts)
- Venus 188 (11 parts)
- Venus 150 (10 parts)
- Venus 152 (9 parts)
- Venus 216 (8 parts)
- Venus 221 (8 parts)
- Venus 206 (8 parts)
- Venus 175 (7 parts)
- Venus 178 (7 parts)
- Venus 179 (7 parts)
- Venus 180 (3 parts)
- Venus 203 (3 parts)
- Venus 204 (3 parts)
- Venus 208 (3 parts)
- Venus 220 (3 parts)