Deutsch
Español
Français
Italiano
FE 68 – interchangeable spare parts
FE (France Ebauches) 68 movement
Which spare parts fit the FE 68 movement? For every part you can see which other calibers use the same part according to the original interchangeability list.
58Parts with interchange data
57Calibers sharing parts
Note: We have compiled this overview to the best of our knowledge and belief, based on the original interchangeability lists of FE (France Ebauches) and the original spare-part labels. All information has been carefully checked but is provided without guarantee. Please verify the interchangeability yourself before fitting, especially the height, diameter and execution of the part.
🛒 Spare parts for FE 68 in our shop
🔧 Interchangeable parts
| Part no. | Description | Also fits |
|---|---|---|
| 100 | Plate | |
| 105 | Barrel bridge | |
| 110 | Train wheel bridge | |
| 182ISO 20.030 | Barrel and cover | |
| 195 | Barrel arbor | |
| 201 | Center wheel | |
| 201-206ISO 30.015 | ||
| 210ISO 30.025 | Third wheel | |
| 217 | Third wheel and pinion, for upper end-piece | |
| 220 | Fourth wheel | |
| 220-227ISO 30.027 | ||
| 220/1 | Fourth wheel and pinion, without second hand bit, for upper end-piece | |
| 240 | Cannon-pinion | |
| 240-245ISO 31.080 | ||
| 250 | Hour wheel | |
| 250-255ISO 31.046 | ||
| 260ISO 31.041 | Minute wheel | |
| 307ISO 40.301.70 | Regulator with adjustable stud holder, for flat hairspring | |
| 336 | Upper cap-jewel with end-piece, for escape wheel | |
| 346 | Lower cap jewel with end-piece, f. esc. wheel | |
| 380ISO 70.500 | ||
| 380 (3618) | ||
| 381ISO 70.501 | ||
| 381 (3619) | ||
| 401ISO 51.010 | Winding stem | |
| 407ISO 31.121 | Clutch wheel | |
| 410ISO 31.120 | Winding pinion | |
| 415ISO 31.020 | Ratchet wheel | |
| 420ISO 31.023 | Crown wheel | |
| 422ISO 81.067 | Crown wheel ring | |
| 425 | Click | |
| 430 | Click spring | |
| 435ISO 51.050 | Yoke | |
| 440ISO 61.100 | Yoke spring | |
| 443ISO 51.080 | Setting lever | |
| 445ISO 51.090 | Setting lever spring | |
| 450 | Setting wheel | |
| 450-450/1ISO 31.100 | ||
| 702 | Escape wheel and pinion, pivoted, for two end-pieces | |
| 705ISO 30.040 | Escape wheel and pinion | |
| 710ISO 40.010 | Jewelled pallet fork and stat | |
| 721ISO 40.050 | Balance with flat hairspring, regulated | |
| 728ISO 40.100 | Balance staff for shockprotecting device | |
| 730/1 | Hollowed-out roller | |
| 770ISO 20.100 | Mainspring | |
| 5105 | Barrel bridge screw | |
| 5110 | Bridges and balance cock screws | |
| 5121 | Balance cock screw | |
| 5125 | Pallet cock screw | |
| 5334 | ||
| 5336 | Upper end-piece screw, for escape wheel | |
| 5346 | Lower end-piece screw, for escape wheel | |
| 5415ISO 31.020.01 | Ratchet wheel screw | |
| 5420ISO 31.023.01 | Crown wheel screw | |
| 5443ISO 51.080.01 | Setting lever screw | |
| 5445ISO 51.090.01 | Screw for setting lever spring | |
| 5738ISO 40.180.01 | Hairspring stud screw | FE 45FE 67FE 140FE 140-1FE 140-1AFE 140-1ADFE 140-1BFE 140-1CFE 140-2FE 140-2AFE 140-2CFE 140AFE 140CFE 163FE 163-1FE 163-3FE 163-4FE 233FE 233-60FE 233-66FE 233-67FE 233-67AFE 233-68FE 233-68EFE 233-69FE 233-69AFE 233-69ADFE 233-69BFE 233-69EFE 233-70FE 233-70AFE 233-70CFE 233-70EFE 233-72FE 233-72BFE 233-72E FE 23DFE 26DFE 26DCFE 27DCFE 45FE 55FE 55AFE 55BDFE 67FE 140FE 140-1FE 140-1AFE 140-1ADFE 140-1BFE 140-2FE 140-2AFE 140AFE 160FE 160-1FE 233-60FE 233-66FE 233-67FE 233-67AFE 233-68FE 233-69FE 233-69AFE 233-69ADFE 233-69BFE 233-70FE 233-70AFE 233-70CFE 233-72FE 233-72BFE 3601FE 3602FE 3611FE 3612FE 4611FE 4612FE PS31AFE PS32CFE PS33CFE S73A |
| 5750ISO 90.000.01 | Dial screw |
Source: original interchangeability lists of FE (France Ebauches) (checked transcription) and checked original spare-part labels · as of 2026-10-17. Height / execution: the part fits only in this height or execution.